Fully equipped washing boxes

Washing the chassis

It helps to prevent excessive corrosion of chassis parts. The program is particularly suitable for maintenance in winter, when the road is salted.

Pre-washing of wheel rims

An alkaline product that effectively helps remove dirt from wheel rims, such as brake dust. It is applied under low pressure.

Chemical pre-washing of the body

An alkaline preparation that helps in the fight against insects and grease. It softens dried dirt, which can then be easily removed with high pressure. It is applied under low pressure.

Active foam

Highly foaming, Ph neutral product for maximum gentle vehicle washing.

Shampooing with micropowder

Main washing programme with high washing performance. Alkaline powder with favourable density effectively and gently removes dirt from the bodywork.

Washing with a brush and shampoo

This is an alternative type of the main washing program for removing very deep impurity. This is a contact wash, so this method is less gentle on the vehicle's paintwork.

Rinse with clean water

It is used to rinse off the detergent residue to ensure effective application of the wax.

Waxing

High-quality wax significantly helps in drying the body and at the same time protects it from other impurities. In this way, the vehicle will stay clean longer and the effect of liquid wipers will appear on the windows.

Final rinse to shine with demineralized water

The most important step in washing is the final rinse with demineralized water. It does not leave traces of limescale after drying. After drying, the vehicle remains beautifully clean.

Drying

Who would want to leave on a bicycle or motorcycle with a wet background? With a powerful drying blower, this won't happen to you.

Chassis washing

Select a programme and stand back to a safe distance to avoid getting wet. Allow this program to run for at least one pulse (15 seconds). We recommend using this program regularly during the winter months when there is a lot of salt on the road.

Prewashing of the rims

Apply the product from a distance of 15-20cm, only on the wheel rims. Avoid contact with the skin and bodywork of your vehicle. This is a more aggressive product for effective removal of brake dust and other wheel contaminants. Do not let the product dry on the wheels of the vehicle.

Chemical pre-washing of the bodywork

Apply the product evenly over the entire body surface from the bottom upwards. The active shampoo loosens insects and coarse dirt. Leave the product on for about 1 minute but do not let it dry. This product is applied under low pressure.

Active foam

Apply the active foam from the bottom up. This programme is an alternative to chemical pre-washing. Active Foam is pH neutral and therefore suitable for vehicles that have paint protection applied. After application, leave on for approximately 1 minute.

Shampooing with micropowder

This is the primary washing programme. Wash the vehicle until the desired result is achieved. Hold the nozzle at a distance of 5-10 cm from the paintwork, varying the angles of the water jet. Work evenly over the entire body surface of the car.

Brushing with shampoo

Use only when heavily soiled! Washing with a brush is very unfriendly to your car's paintwork. Select a programme, grasp the brush and clean the dirty area with gentle, straight movements. Never use the brush without the selected programme, there is a risk of damage to the paintwork. It is also forbidden to use the brush for washing wheel rims.

Waxing

Apply the drying wax to the entire car body from a distance of approx. 50 cm. After applying the wax, it is always necessary to use the final rinse to shine program.

Final rinse to shine

For this programme, water demineralised by reverse osmosis is used. Thoroughly rinse the entire vehicle so that no excess wax remains anywhere. The final rinse is a very important step. After the drops have dried, no white spots remain on the vehicle, leaving it clean. Thanks to the wax, most of the water runs off the vehicle quickly and therefore the vehicle is dry much sooner.

Drying

The drying blower is ideal for washing your bike or motorbike. But you can also use it for drying the vehicle body. Thanks to the wax, the drops from the bodywork run down nicely. Follow the direction from top to bottom. However, this step is not strictly necessary for the reasons mentioned above.

Parking

For bicycles, we have prepared a special rack where you can attach the front wheel so that your bike does not fall off during washing. In case of a motorbike, park it on the motorbike stand properly.

Choose moto/bicycle programme

Drive your two-wheel vehicle into pit 4 and select the motorbike/bicycle programme. This will reduce the pressure to a level that is safer for the bearings, hoses and seat of your machine. Proceed with caution, especially around areas prone to strong water flow.

Shampooing with micro powder

First soak all soiled surfaces from a distance of about 30-40cm. The water and the chemical will slowly start to loosen the dirt and once you get down to thoroughly washing these areas, it will be much easier. Then bring the nozzle of the cleaning gun to about 20cm and wash all the folds of the machine. Don't forget the underside of the mudguards and wheel rims.

Final rinse from gloss

Rinse the entire machine thoroughly so that no chemical residue remains. This is a very important step. For this rinse, demineralised water is used using reverse osmosis. This means that no white droplets form on the surface of the machine when it dries. Proceed in the direction from top to bottom.

Drying

The drying program allows you to drive away on a two-wheel vehicle immediately. You don't have to wipe the machine down and worry about minor scratches. Simply blow dry the parts you need. Follow the direction from top to bottom

Cash, credit card or loyalty programme

Save 10% of the wash price
Washing costs are tax deductible

You can join the loyalty program by purchasing a data key in one of our currency exchanges. The price of the data key is 200 CZK. After purchase, the data key must be charged via the money changer. For every 100 CZK deposited, a bonus of 10% will be added. The maximum amount of the bonus for a one-time charging is 100 CZK (1000 CZK deposited = 100 CZK bonus). If you wish to load a higher amount than 1000 CZK, you must remove the key from the money changer and reload to get the full bonus on the next loaded amount.

Will high pressure washing damage the car's paintwork which can start to peel?

This statement is not true in case the bodywork paintwork is in good order. However, if the paintwork is significantly damaged and care is not taken in these areas, further damage may occur. Examples of this could be where the clearcoat is peeling (commonly caused by UV light on older vehicles), corrosion is starting, or the paintwork is damaged by a stone (front of the bonnet). Do not bring the pressurised water jet too close to these areas.

Is it ok to just rinse the car with water?

We encounter with this claim routinely and we are increasingly convinced that it is a nonsense. A stream of water alone does not have sufficient washing effect to wash the dirt off the car body. That's why we offer a wide range of programmes to achieve the best possible result without contact with the car bodywork.

For us, the 3 most important programmes are: chemical pre-wash, shampoo with micro powder and final rinse to shine.

To set the record straight, there are cases where a water rinse may be sufficient. If you have precision ceramic protection or a PPF film with a strong hydrophobic coating on your vehicle, a water rinse may be sufficient in certain situations.

Do I need the wax?

Using wax on a self-service car wash is not an unnecessary step. It significantly helps to dry the bodywork after the final rinse and adds shine to the paintwork. More importantly, it makes the bodywork less dirty and makes the next wash easier. As a bonus, it then temporarily acts as a liquid wiper.